Domestic boiler condensate pipe insulation. The EPDM insulation is designed for external use (however can also be used internally).
- 1m Long
- Black
- 22m, 32mm, 40mm and 50mm (if you are also using trace heating please
- UV Stable for external use
- Water resistant
- Self-Seal for easy & fast installation
- Reduces the potential of freezing condensate pipes (to eliminate freezing under any condition please add Condensate Trace heating kits)
Insulation Sizes
|
Pipe Size
|
Insulation Bore Size
|
|
21.5mm
|
22mm
|
|
32mm
|
35mm
|
|
40mm
|
42mm
|
|
50mm
|
54mm
|
You may want to consider adding the following products:
- External use Armaflex tape: To aid install on bends, tee’s and longitudinal joints
- Condensate pipe Trace Heating: To guarantee frost protection
Technical Information
|
Material
|
|
EPDM
|
|
|
Cell structure
|
|
Closed Cell
|
|
|
Colour
|
|
Black
|
|
|
Upper temperature limit
|
Tubes
|
150 °C
|
|
|
Sheet
|
150 °C
|
|
Self-adhesive tape
|
90 °C
|
|
Lower temperature limit
|
|
-50 °C
|
see Remark (1)
|
|
|
-200 °C
|
|
Thermal conductivity
|
λϑ
|
0.038 + 8,0 · 10–5 ϑ + 7,0 · 10–7 ϑ2
|
Test acc. to
|
|
DIN EN ISO 8497
|
|
DIN EN 12667
|
|
at -10 °C
|
≤0.037 W/(m·K)
|
|
|
at 0 °C
|
≤0.038 W/(m·K)
|
|
at 10 °C
|
≤0.039 W/(m·K)
|
|
Water vapour resistance
|
Moisture Resistance Factor μ
|
≥ 4500
|
Test acc. to
|
|
DIN EN 12086
|
|
EuroClass
|
|
E / EL
|
Test acc. to
|
|
DIN EN 13501-1
|
|
|
|
see Remark (2)
|
|
Practical fire behaviour
|
|
Self-extinguishing, no drips, does not support flame spread
|
|
|
Insulation material Index number acc. to AGI
|
Tubes
|
36.12.03.06.04
|
|
|
Sheet
|
36.07.03.06.04
|
|
|
Environmental aspects
|
|
ODP Zero
|
|
|
|
GWP Zero
|
|
|
Health aspects
|
|
Dust & Fibre free
|
|
|
|
Heavy metal (e.g. cadmium, lead) and formaldehyde free
|
|
|
Resistance to
|
UV-radiation
|
Excellent
|
|
|
Other attributes
|
|
CE Marked
|
|
|
pH-Value
|
Neutral
|
|
|
Shelf life
|
Self-adhesive products
|
1 year
|
see Remark (3)
|
|
Tolerances
|
|
|
In acc. with
|
|
DIN EN 14304:2013-04
|
|
Outdoor applications
|
|
No additional protection against UV radiation required
|
|
Benefits & Attributes
Durable UV resistant rubber insulation for higher temperatures, Kaiflex EPDMplus is an insulation material with a closed cell structure that provides an inherent water vapour barrier and ensures Kaiflex EPDMplus can be used to prevent condensation and pipe corrosion.
Resisting temperatures of up to 150°C makes Kaiflex EPDMplus appropriate for use on low pressure steam pipework but, in addition, the in-built water vapour barrier of Kaiflex EPDMplus means that the material can also be used on pipework that is operated at very low temperatures or pipework and equipment that intermittently cycles between hot and cold.
Kaiflex EPDMplus is naturally resistant to moisture and chemicals. Together these properties make Kaiflex EPDMplus ideally suited for use in demanding industrial process environments where salt water, chemical vapours and high temperatures combine to accelerate corrosion.
- Closed cell structure with in-built water vapour barrier
- Inherent resistant to corrosion
- Suitable for use at temperatures up to 150° C
- UV resistant for external use
Data Sheets
EPDM Datasheet
Kaiflex_Application_Manual_INT
Domestic Specification
One off carriage fee of £14.99
All Prices are Excluding VAT
VAT and carriage will be added at checkout
